NEW!! SAPAC T45 GOSHAWK
|
The T45 Goshawk from SAPAC is a highly modified version of the
BAE Hawk, designed as a carrier based training system,
the flight characteristics of the Goshawk are of superb precision maneuvers
and pinpoint accuracy. This new model is a very nice rendition of the Goshawk
and flies like a jet should! Not a beginners model by any means, but easy
enough for the intermediate flyer to master. |
||
|
This is a composite kit, full fiberglass fuselage
beautifully crafted and finished in the US NAVY colours, wing is fully
built up film covered and one piece, it runs outboard servos for the
ailerons and undercarriage mounts are in place but the film has not been cut
away, perfect for those wanting to bungee launch and land on grass. Elevator is an all moving design with alloy crossbar and a
clever control arm system that produces a tight accurate control. Cockpit is pre-molded and will take our Wemotec jet pilots, the
perfect finish for this scale looking model. |
|
|
|
Rudder can be cut out and fitted as
an option and the Hawk is capable of knife edge flight! Intake ducting is
supplied pre-moulded in two halves, cut out and
glue together, exhaust duct also supplied. The quality of fit and finish is
very good. Comes with decal set as shown in the picture to the right. |
||
|
GOSHAWK
SPECIFICATIONS The Kit comprises complete airframe with all fittings, molded
inlet ducting and pre-cut joiners and exhaust ducting. The new 70mm 5 blade
GRP fan unit is of excellent quality and once balanced it is a high powered
reliable fan. The supplied BL2842 out-runner motor is rated to 1000 watts!
This powerful motor is a match for the 2W20 Typhoon and runs at 850+ watts on
our standard 4100mah 4s1p 20c battery. Comes with fixed undercarriage, undercarriage can be left off
for bungee launch and landing on grass. The T45 needs good servos, we recommend
9 gram size metal gear for elevator and 6 gram size metal gear for ailerons.
We will be stocking the Sc Retracts can be fitted to the Hawk, our HET spring/air retracts
have been used by many modelers around the world and are the best micro
retracts available, good for up to 2.5kg models. SPECIFICATIONS: Length: 1000mm Supplied EDF Unit: 70mm Supplied motor: 2842 out-runner Suggested servos: 6 & 9g size metal gear servos Suggested ESC: 60A-80A brushless ESC |
T45 GOSHAWK 3 CELL FIXED UNDERCARRIAGE
T45 GOSHAWK stock setup with 3 cell
battery pack and no intake ducting, the production models are even quicker! T45 GOSHAWK BUNGEE LAUNCH T45 GOSHAWK stock setup with 4100 4s1p
battery pack, factory fan and B2842 motor, flying weight of 1650 grams. This flight clocked at 190kmh! |
|
|
SAPAC
GOSHAWK KIT |
PRICE |
|
T45
GOSHAWK
kit with 70mm fan unit & 2842 1000w brushless out runner DUE IN
END OCT |
$299.00 |
EXTREME RC BUNGEE SET
|
EXTREME
RC BUNGEE SET The Extreme RC bungee is designed to launch
jet models that do not have undercarriage and are too small & heavy for
conventional hand launch. Bungee launching is a safe way to ensure your
expensive model gets up into the air first time every time. Constructed of
solid core rubber shock cord with heavy duty nylon extension line and steel
rings connecting the components. This bungee is long enough to launch up to
1.8kg models. |
PRICE |
|
IN STOCK |
$49.00 |
©2008 EXTREME RADIO
CONTROL