EAGLETREE MicroPower E-Logger Version 3!

Whether you’re into Electric Planes, Helis, Cars, Boats or other models, you need to know how your electric power system performs under actual operating conditions. The USB MicroPower E-Logger is the product you've been asking for, and we’re pleased to provide it.



The MicroPower logger has a good subset of the features of its cousin, the EagleTree Data recorder, at a price point that makes it more accessible to those who don’t need the advanced features or expandability of our Data Recorder systems.

 

 

Here are the key features of the MicroPower:

  • Logs pack current to 100 amps and voltage to 70 volts
  • Software computes Wattage, mAH, etc. for complete e-flight data.
  • Accepts optional inexpensive sensors for Temperature and RPM (magnetic or optical), available below
  • Supports simultaneous Temp and RPM sensors, or two Temps
  • Weighs about 0.5 oz (17 grams). Version with Wire Leads weighs slightly more.
  • Supports USB Live Mode, which lets you see what's happening in the model LIVE on the bench, on your PC
  • Adjustable logging rate (1-10 samples/second) and lossless data compression for long log times
  • Comes with our state of the art Windows virtual playback display and graphing
  • Powerful Graphing software has advanced charting features, such as amps vs volts
  • Internet Updatable firmware - as we add new features or (heaven forbid) have a firmware bug, the update is just a download away! No need to ship hardware back and forth.
  • Full support for English and Metric units

The MicroPower system comes with everything you need to log current and voltage, right out of the box (logger, USB cable, CD, manual).

 

NEW: PowerPanel LCD Display - a Gas Gauge for your Pack

Now you can connect our new PowerPanel super lightweight LCD Display module to your MicroPower!

 

This ultra thin LCD display connects to the MicroPower with the included 11" data cable, and lets you get your max and live data displayed without a PC, just like the heavier, non-logging Watt Meters on the market.

 

 

The display is fully programmable to show you live and max Voltage, Amperage, Temperatures, RPM, mAH used, and more! Since you can know your mAH after your session, you know approximately how much juice is left in your pack!

Just connect it after your session for read back of live and max data. Or, since the PowerPanel is so light, it can easily be attached to the side of your model for live/max display all the time!

 

Here are a few of the features of the PowerPanel:

  • Ultra-thin LCD display connects to the MicroPower with the included 11" data cable.
  • Live Display of Amps, Volts, mAH, Temperatures, and RPM (more coming soon, by simply download our latest Windows program).
  • Cumulative mAH display serves as a “gas gauge” for your battery pack. By knowing how much has been used, you can know approximately how much is left!
  • Up to 4 parameters can be displayed per “virtual page” on the PowerPanel.  Each parameter has a programmable label.
  • Supports Multiple “Pages” of data, with programmable ways of switching between the pages.
  • Supports display of both Live data, and Max values, with programmable ways of switching between Live and Max.
  • Supports “hot plugging” into the MicroPower after your session.
  • So light, it can easily be attached to the side of your model for live/max display all the time!
  • System supports both Metric and English units.

 

LOGGER & ACCESORIES

EagleTree MicroPower E-logger V3

 

The MicroPower logger has a good subset of the features of its cousin, the EagleTree Data recorder, at a price point that makes it more accessible to those who don’t need the advanced features or expandability of our Data Recorder systems.

 

Available with T connectors fitted or bare leads for fitting your own plug style.

 

Update: we currently stock only the bare leads on the shelf as 99% of customers want the leads, and our own use has shown the logger with plugs to be sometimes very difficult to install into your plane. Of course if you need the logger with plugs as shown in the photo we are happy to supply one!

NEW V3 Logger has much larger memory chip for recording and can accept voltages up to 70V input.

 

Price $105.00

DUE IN EARLY JAN

 

 

 

 

EagleTree MicroPower E-logger V3  HI AMP VERSION

 

The MicroPower logger has a good subset of the features of its cousin, the EagleTree Data recorder, at a price point that makes it more accessible to those who don’t need the advanced features or expandability of our Data Recorder systems.

 

Available with T connectors fitted or bare leads for fitting your own plug style.

 

Update: we currently stock only the bare leads on the shelf as 99% of customers want the leads, and our own use has shown the logger with plugs to be sometimes very difficult to install into your plane. Of course if you need the logger with plugs as shown in the photo we are happy to supply one!

NEW V3 Logger has much larger memory chip for recording and can accept voltages up to 70V input. This model can log up to 150 amps input!!

 

Price $129.00

IN STOCK

 

 

 

 

EagleTree Power panel LCD display

 

This ultra thin LCD display connects to the MicroPower with the included 11" data cable, and lets you get your max and live data displayed without a PC, just like the heavier, non-logging Watt Meters on the market.

 

Price $59.00

OUT OF STOCK

 

 

 

 

Altimeter V3 for MicroPower E-logger

 

This sensor measures altitude with approximately 3 foot (1 meter) resolution. And, it runs standalone as a Max Altitude display sensor as well as connecting to the eLogger!

 

Price $58.00

IN STOCK

 

 

 

 

Airspeed sensor for MicroPower E-logger

 

This sensor measures airspeed from approximately 2 MPH to 350 MPH. And, it runs completely standalone as a Max display sensor as well as connected to the eLogger! Includes Pitot tube.

 

Price $65.00

IN STOCK

 

 

 

 

Hard wired motor RPM Sensor For MicroPower E-logger

 

Measures your RPM by connecting to one of your motor wires and programming the motor parameters into the logger. An easy and accurate method of monitoring your RPM without the need for positioning sensors.

 

Price $21.00

IN STOCK

 

 

 

 

Optical RPM Sensor For MicroPower E-logger

 

Measures your RPM without need for installing magnets. Note: This version is for the MicroPower V2, which is the current MicroPower version we are selling. The MicroPower V2 has the large white letters "V2" on the bottom of the circuit board, near the RPM/Temp pins.

 

 

Price $21.00

IN STOCK

 

 

 

 

Temperature Sensors for MicroPower E-logger

 

1: Loop-around temperature sensor measures up to 420 degrees F. Great for looping around motors. Up to two temperature sensors can be connected to the MicroPower simultaneously.

 

Price $15.00

IN STOCK

 

2: Single ended micro temp sensor measures up to 250 deg F. Great for batteries etc.

 

Price $15.00

IN STOCK

 

 

 

 

Cable for Spectrum Radio!

 

Connects to Spectrum radios

 

 

Price $10.00

IN STOCK

 

 

 

 

 

Memory Expander for MicroPower E-logger

 

Expand the memory of your micro-logger for recording even longer flights or with more sensors connected at once.

 

 

Price $35.00

IN STOCK

 

 

 

 

Multi Expander for MicroPower E-logger

 

Expand your logger to accept extra sensor inputs and log all your parameters at once!

 

 

Price $29.00

IN STOCK

 

 

 

 

 

Servo Current Logger for MicroPower E-logger

 

Measures your servo load currents, a must have for large multi servo installations to ensure you are not overloading your UBEC or servo power supply.

 

Price $38.00

IN STOCK

 

 

 

 

Y cable  for logging ESC throttle etc

 

Allows you to log the throttle points, and servo positions during flight!

 

 

Price $10.00

IN STOCK

 

 

 

 

 

Expander Extension cable  for MicroPower E-logger

 

Gives you that extra length you need when connecting the expander modules, LCD screen etc to your logger.

 

 

Price $8.00

IN STOCK

 

 

 

 

 

HOME

 

©2008 EXTREME RADIO CONTROL AUSTRALIA