Jet-Teng makes amazing models, the detail and quality of the glasswork is first rate. The Hawk features many quality fitting usually found in larger turbine airframes, the elevator mechanism is a work of art, CNC machined alloy framework with all moving elevators floating on bearings.

The JTM Hawk is a high performance Ducted Fan Jet in full composite construction, made for 90mm Fan units such as the WeMoTec MidiFan PRO, HET 9305 & 9305-700 or Schubeler DS51.

The airframe features a fully composite fuselage and wing with retract hard points pre-installed in the nose and retract hatches pre-cut in the wing. The model comes completely pre-painted with all decals applied and protected by a clear coat.

Further is the cockpit pre-glued and all hatches are assembled with pin locks in place. The Model features a full flying stabilizer, ailerons and flaps. A rudder is not cut out but can be fitted relatively easily.

This model is truly an ARF with all the hard work done for you. The all moving stabilizer is a good example, it comes completely assembled with only 4 bolts needed to install it on the model. Retracts and suitable scale oleo struts are available as option and can be found on the same webpage as the kits.

KIT CONTENTS:

Fully painted and finished glass fiber fuselage with fully assembled vertical fin and pre-installed ducting, clear canopy with pre-installed pin lock, one-piece painted glass fiber wing with aileron, flap and retract hatches, exhaust duct sheeting included, all small parts, hardware pack, gear door covers.
Molded gear doors are included. The Hawk is available in Black, Red Arrows, or T45 GosHawk colours.

The Hawk is the perfect platform for one of our high powered 6-10 cell fan systems, with a projected all up weight around 3.5kg even our high powered 6 cell Wemotec/ARC system will have you around 1:1 thrust to weight, of course with the hot 8 cell setup and 4.5kg on tap the sky is no longer the limit!!

The video below is of the test Hawk by the Wemotec pilots after all the adjustments had been made to the kit.

SPECIFICATIONS:

• Scale: 9/1
• Length:1320mm
• Wing Span:1110mm
• Material: Fibreglass composite
• Fan: 90mm
• Power: 6-10 cell power system