Sales Message Goes Here

TAFT VIPER 90mm H-PAT RED 8s

$605.00

VIPERJET PRICE INCLUDES EMS SHIPPING ANYWHERE IN AUSTRALIA AND NEW ZEALAND! WE CAN SHIP ANYWHERE IN THE WORLD, PRICE WILL BE A LITTLE HIGHER, PLEASE EMAIL TO ENQUIRE. WE SHIP DIRECTLY FROM CHINA DUE TO THE BOX SIZE AND WEIGHT. LEAD TIME IS USUALLY 3 DAYS DEPENDING ON STOCK LEVELS EX WAREHOUSE. SHIPPING IS EXPRESS AND AVERAGES 5-7 DAYS.

THIS IS VERSION 3! ALL NEW ALLOY AND STEEL RETRACT UNITS, NEW PLASTIC WHEELS WITH RUBBER TYRES AND BALL BEARING HUBS. PRICE HAS GONE UP DUE TO THE NEW RETRACTS.

TAFT Hobby's big VIPERJET is here! These are an awesome kit, the finish is excellent, its one of the best 90mm foamies to come out for a long time.

SPECIFICATIONS

  • Wingspan: 1450mm
  • Length: 1274mm
  • Servos: 11pcs 9g Digital Metal Gear(CYS) installed
  • Landing Gear: Retractable alloy retracts & struts with sequenced gear doors
  • Fan Unit: TAFT 90mm 8 cell fan with HW 80A-HV ESC & 5A UBEC.
  • Recommended Battery: Extreme Power 5000mAh 6s or 8s 45c minimum.
  • Flying Weight: Approx 3.5kg for 6s, 4kg for 8s
  • Recommended Radio system: 6CH minimum

The Viper is a very strong EPO airframe with spars molded into the wings and empennage. Wings bolt on and the fit and finish is superb. Retracts and electronics are all prefitted, the Viper comes with working gear doors and a sequencer too!

Flick your retract switch, the main and nose doors open, retracts extend, then the main doors close again! Flick the switch to raise the wheels and the main doors re-open, wheels go up, all doors close. Its pretty trick and I can tell you from the demo model we have been flying it works! The only negative is the wheel axles etc should be removed and locktited in before you fly, better to spend a little time securing all screws rather than lose a wheel.

We are supplying the Viper with the factory servos as so far they have proven to be reliable in our 8s test model even at 200kmh. All servos are digital metal gear and for the price they are worth having prefitted ready to connect and trim.

If you want to go to the next level with some serious fan power we recommend our JETFAN 90 fan units running either hot 6s or 8s setups. The first video below is running our Jetfan90 with HET 700-68-1680 motor and Platinum PRO 120A esc. This fan is hot, pulls around 110 amps at full throttle and puts out over 4kg thrust with very high efflux, the Viper weighs in at approx. 3.7kg with a pair of our ELITE 5000 4s packs and the vertical climb from a level pass is impressive!

EXTREME 8s JETFAN VIPER VIDEO

EXTREME 6s VIPER VIDEO

Some suggested fan combos:

  • 6s: EXTREME GRP JETFAN-90 & HET 650-68-2000kv - 100A / 2200W / 3.3kg thrust
  • 8s: EXTREME GRP JETFAN-90 & HET 650-68-1600Kv, 100A / 3040W / 4.4kg thrust!
  • 8s: JETFAN-90 & HET 700-68-1680kv - 110A / 3200W / 4.2kg thrust

NOTE:Static thrust from the factory Jetfan housing is not a good indication of the fans performance, it is designed for dynamic performance as well so actual in air performance is very impressive as can be seen by our video.


  • Shipping Weight: 6kgs
  • 2 Units in Stock


This product was added to our catalog on Monday 01 September, 2014.

Customers who bought this product also purchased...