Sales Message Goes Here

STINGER-1 PYLON RACER RED

$269.00

EXTREME RC Is proud to present TopModel kits to Australia! We will be stocking the pylon racers and some performance gliders as regular items, and can order in any TM kit you desire!

Stinger is a small electric-powered fast agile model. The airfoil used as well as the conceptions applied give the model high flight performance. Thanks to an aerodynamically clean airframe the model has a surprisingly shallow glideslope. It flies very well even with a mild setup.

Stinger is agile and break-resistant enough to be capable of aerobatics. An another interesting possibility is to equip the model with a folding propeller and fly the Stinger on the slope. Manufactured in the Czech Republic. Spare parts are available to order.

A word from EXTREME: We set these models up fast! :)) Typical of the Extreme Camp we have been flying the pylon racers for a while and our recommended hot power combo will see you doing around 150mph plus with good batteries! We have mild to wild setups, bear in mind anything will break if you treat badly enough! pulling full elevator from a dive at over 150mph could result in a cracking sound :D so common sense is required but when you see our videos you will see that these things can be thrown around pretty hard!

SPECIFICATIONS:

  • light fiberglass fuselage reinforced with carbon.
  • One piece wing is rib construction that is fully sheeted with balsa.
  • light structural balsa elevator, covered with Oracover.
  • vinyl cnc cut stickers.
  • top quality accessories: servo covers, servo mount, rods, ending ties, control horns, tape for sticking flaps, fiberglass motor mount.
  • Span: 950mm.
  • Length: 760mm.
  • Flying weight: 500-600 grams typical.
  • complete assembly manual with step by step illustrations.

RECOMMENDED COMPONENTS:

  • 2 micro servos for ailerons: GWS NARO +F/BB, Graupner DES478BBMG or similar.
  • 1 micro servo for elevator: GWS NARO +F/BB, Graupner DES478BBMG or similar.
  • Motor: Sporty: HET 3W15 Hotter: HET 2W23.
  • HW Flyfun 40A, Platinum PRO 40A.
  • Spinner: MP Jet 30mm with 3.2mm collet.
  • Propeller: APC Speed 400 prop, varies depending on setup.
  • Battery: 3 cell 1800-2200 35c+ / 4 cell 1300-2200 35c plus.


Add to Cart:

  • Shipping Weight: 2kgs
  • 2 Units in Stock


This product was added to our catalog on Sunday 10 November, 2019.