HYPERION TITAN
BRUSHLESS SPEED CONTROLLERS
|
Note that standard
Hyperion BEC ESC (not switching BEC), such as the 20A TITAN are appropriate
for smaller model airplanes which typically use 4 servos maximum with lithium
packs up to 3S in voltage. Hyperion uses powerful BEC chips, and also include a heatsink for those chips which increases time to
overload by more than 50% compared to other brands.
|
MODELS NOT
LISTED ARE USUALLY AVAILABLE, PLEASE EMAIL OR CALL TO ENQUIRE
|
Hyperion TITAN 10A BEC HP-TITAN-20-P3 Price: $49.00 IN STOCK |
|
|
Hyperion TITAN 20A BEC / V3 Firmware HP-TITAN-20-PW3 Price: $59.00 IN STOCK |
|
|
Hyperion TITAN 20A BEC / V3
Firmware / TITAN WARNING LED System HP-TITAN-35-PSW3 Have you been
looking for a fully programmable, slim, low-noise brushless controller at a
more reasonable price? You found it NOTE: If you
use the Hyperion E-meter to program the V3 TITAN ESC, the latest E-meter
firmware is required. You can also program by Transmitter stick, or by
HP-TI-PRGUSB USB adapter with free Windows software. This version also
includes TITAN WARNING LED System, which gives advance warning of low
battery. With today's low resistance lithium polymer batteries, and A123
cells, this is important since little capacity remains in the pack at cutoff
time... Price: $65.00 IN STOCK |
|
|
Hyperion TITAN 30A BEC / V3 Firmware HP-TITAN-30-P3 Price: $74.00 IN STOCK |
|
|
Hyperion TITAN 30A BEC / V3 Firmware / TITAN WARNING
LED System HP-TITAN-30-PW3 Price: $79.00 IN STOCK |
|
|
New! Hyperion TITAN 35A with 4A Cool SBEC 6-18 NiX / 2S-6S / TITAN WARNING LED System / V3 Firmware HP-TITAN-35-PSW3 This is the
ultimate ESC for applications such as Trex-450 Class Helicopters, 480-Class
EDF Jets, 3D Aerobatic models... and more. New TITAN WARNING LED system tells
you the state of flight pack voltage during the flight, so you aren't caught
off guard when auto-cut kicks in (or even allows you to turn auto-cut off
entirely). The 4A Cool
Switching BEC can handle high loads from Digital Servos and Gyro, even with
6S flight pack. Hyperion NET Noise Elimination Technology insures
uninterrupted control of your model. New V3 Firmware includes various
improvements, including a super-soft 15-second spool when Governor Mode is
enabled, to spare your main gear, and Auto-Cut Cell Voltage settings from
2.0V to 3.2V/cell, to handle any lithium chemistry, including A123 Racing
cells. Price: $120.00 IN STOCK |
|
|
Hyperion TITAN 50A BEC / 5-12 NiX /
2S-3S Lipo / (6S max with BEC Disabled) V3 Firmware / TITAN WARNING LED
System HP-TITAN-50-PBW3 Price: $105.00 IN STOCK |
|
|
Hyperion TITAN 50A OPTO (no bec) / 5-16
NiX / 2S-6S Lipo / V3 Firmware / TITAN WARNING LED
System HP-TITAN-50-POW3 Price: $105.00 IN STOCK |
|
|
Hyperion
TITAN 80A OPTO (no bec) / 5-16 NiX / 2S-6S Lipo HP-TITAN-80-PO Price: $135.00 IN STOCK |
|
|
Hyperion TITAN 80A OPTO / 5-16 NiX
/ 2S-6S / V3 Firmware / TITAN WARNING LED System HP-TITAN-POW3 Price: $135.00 IN STOCK |
|
|
Hyperion COOL UBEC Hyperion Switch-Mode BEC Unit with NET Noise
Elimination Technology - 4A Sustained Rating, 5A Max, Selectable 5V or 6V Output,
Use with up to 10S Lithium Packs, Compact and 20g! Unlike standard BEC circuits, TICOOL-BEC is
a switch-mode regulator. This means that it efficiently converts even 40V
(10S) to match the receiver at 5V or 6V, selectable, without overheating. As
such, the TICOOL can support as many as 8 standard servos (or as many as 6
Digital), almost regardless of the type of main pack used. Specifications: Price: $40.00 IN STOCK |
|
©2007 EXTREME RADIO
CONTROL