ALL EXTREME RC MODULES ARE C-TICK COMPLIANT!

The FrSKY 2.4 Gig radio module system is a high quality conversion kit that fits most JR radios with removable frequency modules fitted to the Transmitter. This latest 2.4G technology is a full frequency hopping system (FHSS) similar to the Futaba FAAST technology. This is the original FrSKY module, it runs the older style D8 and V8 series receivers, great for someone on a budget who just wants rock solid 2.4 conversion for their JR radio!

ACCST: (Advanced Continuous Channel Shifting Technology) is our advanced technology. The ACCST 2.4GHz system shifts the frequency hundreds of times per second. This means signal conflicts and interruptions are largely eliminated.

FAILSAFE: The FrSKY system also has a failsafe setup built in which can be easily activated inside the receiver with the push of a button. The failsafe will set all controls to their neutral position and cut the throttle as soon as it senses a signal loss, reconnection was almost instant during our tests of the system. You can also hold the sticks in the position you would like the failsafe to return to and then set failsafe on, the Rx will remember the stick positions and will continue to remember until you rebind the Rx.

DUAL Rx ANTENNAS: The front-end of the receiver does switch antenna, when one suffers a loss of signal the ES02 chip switches over to the other antenna. If for some reason neither antenna have a signal (for example the transmitter is switched off), then the receiver rapidly switches between the two until one picks up a signal. It does this around 30 times per second. Coupled with the really fast re-link time, this antenna diversity means that the overall transmitter-receiver link should be as solid as the very best of the big (and expensive) name brand products.

The transmitter module accepts either polarity of PPM and at either logic or battery voltage. This means you can wire it up to almost any PPM set.

The FrSKY system also has a failsafe setup built in which can be easily activated inside the receiver with the push of a button. The failsafe will set all controls to their neutral position and cut the throttle as soon as it senses a signal loss, reconnection was almost instant during our tests of the system. You can also hold the sticks in the position you would like the failsafe to return to and then set failsafe on, the Rx will remember the stick positions and will continue to remember until you rebind the Rx.

FEATURES:

• ACCST technology(Advanced Continuous Channel Shifting Technology) provides high interference rejection even in an interference rich environment.
• Easy to bind and instant link-up.
• Excellent reboot times.
• All channels are very effective and easy to set failsafe.
• Responsive and rock-solid in performance.
• Very Smooth servo movement.
• Alarm on events of receiver( low battery voltages, poor reception, etc.)
• Error-free link, by using 48bits CRC algorithm.
• Low power consumption.
• True antennas diversity.
• Firmware upgradable.
• Compatible with V8 series receivers.

INCLUDED IN KIT:

• Telemetry Transmitter module (Model: DJT)
• Transmitter antenna (Model: V8JTA)
• Receiver: V8FR-II HV

TRANSMITTER MODULE COMPATIBLE WITH THE FOLLOWING UNITS:

• JR: 347 / 388 / 783 / U8 / PCM10 / PCM10S / PCM10SX / PCM10IIS / 8103 / J9303 / MX-22 / MX-24S / 9X / 9XII

TRANSMITTER MODULE SPECIFICATIONS:

• Operating Voltage Range: 6.0V-13.0V
• Operating Current: 50mA
• Output Power: 60mW< /li>
• Resolution: 10bit
• Dimensions: 58.5x37.5x22mm< /li>