Newest version of the CS Electric retracts to suit larger sports planes and warbirds up to 6.5kg. We use these retracts in the Phoenix STREGA at 6.3kg and they are holding up well! A great low cost setup that requires no extra servos, just connect to your retract channel with Y leads! NOTE: This is the nose retract unit with 5mm pin and steering arm built in.

We can do custom ERC struts to suit these retracts, please email with your model and requirements.

RETRACT FEATURES:

• 3 seconds overcurrent/jamming protection
• Auto recovery after overcurrent and jamming protection
• Smart circuit to prevent retract unit from accidentally retracted even if you connect power of the plane when the RC control was set to retract the landing gear. Protect your plane from scratch or damage.
• Use carefully with models heavier than 6kg
• Voltage 4.8-6V
• Working current 0.3-0.6A
• Mounting hole spacing: 42W x 30L
• Mounting plate dimensions: 51W x 42L
• Depth: 29mm
• Overall length: 92mm
• Width between rails: 22mm
• Trunion height from mounting plate approx. 3mm.