ELITE 5000mah 3s1p 35c/60c Lithium Polymer

Weight: 370 grams

Dimensions: T32 W50 L165

Extreme Power ELITE 35 cells are the PREMIUM LiPo cell out of China, these cells have the highest quality materials and are produced exclusively with Lithium Iron Cobalt, the Premium, and ONLY material for serious LiPo cells. Why doesn't everyone use it? Because it costs $50,000 a ton where-as Lithium Manganese costs $6000 a ton. AND to top it off all Extreme Power cells are Graphene based using Carbon Nano Tubes (CNT) in the substrate, improving power delivery and cycle life, no wonder customers get hundreds of cycles from our packs in their hi performance models!

Many customers have achieved over 150 cycles from our ELITE cells whilst running at 20c constant discharge for 80% of their flight (You must follow good storage and usage techniques to achieve a long lifespan for your packs).

All our packs undergo strict assembly procedures, stringent cell quality and Production QC protocols ensure these cells give high sustained power output and do so for many cycles, perfect for demanding EDF applications.

What is C rating? It is a factory term for the discharge rate a cell can supply. 10c means 10 times the capacity, so a 10c 2200mah battery would have a discharge rate of 22 amps maximum continuous.

When we say 'burst ratings' we mean the short term amp draw under high load, usually 3 seconds run time, so a 2200mah battery with a burst rating of 30c can theoretically handle a 66 amp load for a short period. Recovery should be 30+ seconds depending on the quality of the battery.

With the fast advances in Lipo technology even the cheap packs put out more power than many of the premium brands did 4 yrs ago, but be aware these cheap batteries are cheap for a reason, they are grade 2 cells, lower quality materials and much less QC when being tested and assembled into packs. They do not last as long as the premium grade cells and will not tolerate abuse with continuous high C discharge rates, not as suitable for high powered sports models or EDF as a premium pack.

Balance leads: Our packs all use the common JST-XH plugs now as all chargers come standard with JST boards or ports these days.

35c RATED PACKS: We recommend keeping your maximum static amp draw to 25c for prop driven planes and 20c for EDF planes. (As many EDF planes will increase in load during flight) Burst amps of 35c maximum should be observed for increased lifespan (Dependent on ventilation and cooling of the pack during flight).

45c RATED PACKS: We recommend keeping your maximum static amp draw to 30c for prop driven planes and 25c for EDF planes. (As many EDF planes will increase in load during flight) Burst amps of 45c maximum should be observed for increased lifespan (Dependent on ventilation and cooling of the pack during flight).

Our batteries will operate at their rated specs no problem, but who wants to fly for 2 minutes or so by drawing 30c current levels, and who wants to shorten their pack lives by hammering them the entire time!